The Pro iCAN is our flagship amplifier with exceptional power and sonics.
Headphones or speakers, solid-state or tubes, the Pro iCAN has you covered.
Drives anything and everything
The Pro iCAN is a top-of-the-line, headphone amplifier that is capable of driving anything and everything – from the most sensitive CIEMS through to the most difficult to drive headphone ever made, the AKG K-1000.
It is the only amp you will ever need.
Balanced amplifier
Boasting a true differential balanced amplifier, the Pro iCAN will rock your headphones/speakers like no other.
Balanced equals exceptional quality – minimal interference and reduced crosstalk.
The sound is cleaner, deeper and more dynamic.
S-Balanced outputs
Get the best our of balanced AND single-ended headphones with our S-Balanced tech.
S-Balanced means that single ended headphones reap the advantages of balanced wiring, enjoy lower distortion and reduced crosstalk.
To tube or not to tube…
Choose a setting to suit your mood or your music.
With the Pro iCAN you can enjoy both the sound of solid-state or tubes in a single package and switch in real-time.
For some recordings and/or headphones or speakers – you may prefer the ‘lively’ feel of solid-state for other the more ‘luxurious’ feel of Tube or Tube+.
Yup, we love our tubes here at iFi and we hope you do too.
And finally…
So, you thought we’d done? If the above wasn’t enough, we’ve added our signature, sonic tweaks of 3D and XBass to add that bit of extra space and depth to your sound.
So, sit back, relax and enjoy all the musical refinements that the Pro iCAN has to offer. Go on, you know you want to…
Gain is adjustable from 0dB/9dB/18dB.
It can output more than 10V in Single-Ended mode and 20V in Balanced-mode. The 20V mode is equivalent 100W into a 40 Ohm speaker.
Power like no other. Super-powerful 14,000mW headphone output power.
The flagship Pro iCAN is full-differential balanced. This is there are totally separate left & right channels with their own +/- all the way through.
This exquisitely engineered design is expensive but the way it stirs the soul is worth it.
The iFi exclusive S-Balanced technology makes its debut in the Pro iCAN.
It delivers the maximum performance from both single-ended and balanced headphones. The S-Balanced (single-ended compatible balanced) 3.5mm headphone output delivers the benefits of the balanced connection to single-ended headphones.
You can switch from soild-state to tubes in real time.
There are 2 tube settings; Tube and Tube+.
The Tube+ position reduces overall loop-gain and thus negative feedback to the minimum. This gives a different trade-off between the tube’s natural harmonics and the transient performance.
An ‘Out of Head’ listening experience. Our 3D Holographic® dual-analogue matrices place the artist with you in the room, not inside your head.
Sonically superior – richer, deeper.
The XBass® analogue bass correction system corrects for the missing headphone/speaker bass response.
Specifications
Gain: |
0dB, 9dB and 18dB user-selectable |
Frequency Response: |
0.5Hz to 500kHz(-3dB) |
Total Harmonic Distortion (THD, Balanced/Single-Ended, S-BAL): |
|
Balanced |
SE (S-Bal) |
Solid-State: |
≤0.0015% |
≤0.005% |
Tube: |
≤0.002% |
≤0.005% |
Tube+: |
≤0.012% |
≤0.2% |
Signal-to-Noise Ratio (SNR, Balanced/Single-Ended, S-BAL): |
>147dB(A) / > 137dB(A) |
HP Output Impedance |
Balanced: |
< 2 Ohm |
|
Single-Ended, S-BAL: |
< 1 Ohm |
|
Output Power (16Ω, Balanced/Single-Ended, S-BAL): |
>14,000mW / >4,800mW |
Output Voltage (600Ω, Balanced/Single-Ended, S-BAL): |
>23V / >11.5V |
Input Voltage (Pro iCAN): |
DC 9V/6.7A – 18V/3.35A |
Input Voltage (iPower Plus): |
AC 85 – 265V, 50/60Hz |
Power Consumption: |
≤ 22W idle, 50W max. |
Dimensions: |
213(l) x 192.5(w) x 63.3(h) mm |
Weight: |
1.93kg (4.3lbs) |
Test conditions: Gain = 0dB, 0.775V(0dBu) with 300 Ohm load unless stated otherwise SNR Balanced re 23V, SNR SE S-BAL re. 11.5V |